Catalytic CPA QA-20 Owner's Operation And Maintenance Manual

Model CPA QA-20
Owner Operation and
Maintenance Manual
IMPORTANT S A F E T Y I N S T R U C T I O N S
Read and save these instructions.
Always unplug the CPA QA-20 Air Purification System when it is not in operation, while
the Filters or UVC germicidal lamps are being changed, and when cleaning. After
servicing this equipment both the front and top grill assemblies must be reinstalled in
exactly the same manner as prior to removal. If either grill is not reinstalled properly the
Catalytic Pure Air Portable Air Purification System will not turn on. This is a built in
safety feature.
Before using the Catalytic Pure Air Portable Air Purification System extend the power
cord and inspect for any signs of damage. Do not use the product if the power cord has
been damaged.
Warning - This appliance is designed to be used on a flat level surface, and may not
work properly on an uneven surface. To reduce the risk of electric shock and injury, do
not place in a window. Always place the air purifier at least 12 inches (30.48
centimeters) away from heat sources such as stoves, radiators, or heaters.
Do not move the Catalytic Pure Air Portable Air Purification System while it is in
operation.
Always unplug prior to moving.
Do not immerse the Portable Air Purification System in water, as permanent damage
will occur. Refer to the "Performing Maintenance" section in this owner operation and
maintenance manual.