Maintenance - Toro 51490 Operator's Manual

Operating Tips
•
The unit is used for cutting in either direction in a slow, sweeping
action from side to side.
•
Stand so that you are stable and balanced on both feet. Do not
overreach.
•
Inspect and clear the area of any hidden objects.
•
Never use the hedge trimmer near power lines, fencing, posts,
buildings, or other immovable objects.
•
Never use a blade after hitting a hard object without first inspecting
it for damage. Do not use if any damage is detected.
•
Never touch blades or service unit with the power supply
connected.
•
When operating the hedge trimmer, keep the extension cord
behind the trimmer. Never drape it over the hedge being trimmed.
•
Do not force the hedge trimmer through heavy shrubbery. This
can cause the blades to bind and slow down. If the blades slow
down, reduce the pace.
•
Do not attempt to cut stems or twigs that are larger than 9/16 in.,
or those obviously too large to feed into the cutting blade. Use a
non-powered hand saw or pruning saw to trim large stems.
•
If blades do become jammed, stop the motor, allow the blades
to stop, and disconnect the plug from the power source before
attempting to remove the obstruction.
•
If desired, you can use a string to help cut your hedge level.
Decide how high you want the hedge. Stretch a piece of string
along the hedge at the desired height. Trim the hedge just above
the guide line of string. Trim the side of a hedge so that it will be
slightly narrower at the top. More of the hedge will be exposed
when shaped this way, and it will be more uniform.
•
Wear gloves when trimming thorny or prickly growth. When
trimming new growth, use a wide sweeping action, so that the
stems are fed directly into the cutting blade. Older growth will
have thicker stems and will be trimmed easiest by using a sawing
movement.

Maintenance

Oiling the Trimmer Blade
1. Stop the motor and disconnect from power supply.
2. Clean dirt and debris from the body of the hedge trimmer, using a
damp cloth with a mild detergent.
Note: Do not use any strong detergents on the plastic housing or
the handle. They can be damaged by certain aromatic oils such as
pine and lemon, and by solvents such as kerosene.
3. Lay the hedge trimmer on a flat surface. Apply light weight
machine oil along the edge of the top blade. If you will be using
the hedge trimmer for an extended period of time, it is advisable to
oil the blade during use.
Note: Do not oil while the hedge trimmer is running.
Service
Should this item need service, take the product to your Authorized
Toro Service Dealer. Your Toro Dealer is specially trained to fix Toro
products and will ensure that your Toro stays "All" Toro.
Double-insulated Appliance
In a double-insulated appliance, two systems of insulation are
provided instead of grounding. No grounding means is provided on
a double-insulated appliance, nor should a means for grounding
be added to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the system, and should be
done only by the qualified service personnel at your Authorized Toro
Service Dealer. Replacement parts for a double-insulated appliance
must be identical to the parts they replace. A double-insulated
appliance is marked with the words "Double Insulation" or "Double
Insulated." The symbol (square within a square) may also be marked
on the appliance.
Storage
•
Clean all foreign material from the product.
•
Store it in a well-ventilated place that is inaccessible to children.
•
Keep away from corrosive agents such as garden chemicals and
de-icing salts.
4