Pre-Delivery Checklist - Cub Cadet FM48 Operator's Manual

FM48/FM60/FM72

7 - PRE-DELIVERY CHECKLIST

To the dealer: Inspect the machine thoroughly after assembly to assure it is
functioning properly before delivering it to the customer. The following checklist
is a reminder of points to cover. Check off each item as it is found satisfactory or
after proper adjustment is made.
Gearbox oil level.
Guards and shield properly fastened.
Lubrication of grease fittings.
All hardware properly tightened.
All decals properly located and readable (see fig. 4).
Blades properly installed, blade bolts & nuts tightened.
Overall condition (touch up scratches, clean and polish).
Test run, check for excessive vibration or overheating of bearings.
Operator's Manual.
Review the operator's manual with the customer. Explain the following:
Warranty.
Safe operation and service.
Correct machine installation and operation.
Daily and periodic lubrication, maintenance and inspections.
Troubleshooting.
Operational procedures and storage.
Parts and service.
Give customer the operator's manual and encourage the customer to read the
manual carefully.
Model Number: __________
Delivery Date: __________
P -D C
RE ELIVERY HECKLIST
Serial Number: __________
Dealer's Signature: __________
32
O ' M
PERATOR S ANUAL
C C Y
UB ADET ANMAR