Exchanging Power Tips ACCELERATED.COM The 5301-DC comes with a universal power supply unit (PSU) and four interchangeable plug tips that allows the PSU to operate in most countries. The PSU comes with the United States style plug installed. To change the plug tip: • Using a small screw driver, place in half circle area just below power prongs, and push in and upward.
8. When the transfer of data is completed, the Indicator Light changes back to a solid green. Note: The Phone port of the 5301-DC must never be connected to the public telephone network and should only be connected to your dial-up device. Internet Router 5301-DC User’s Guide...
1. Make sure the phone cord is attached correctly. (see Figure 1) 2. Connect a Telephone to the PHONE Port to verify the 5301-DC simulated dial tone is audible. 3. Change to a different phone cord cable.
ACCELERATED.COM Network Managed Configuration Your Accelerated 5301-DC has the capability to automatically sync and receive all settings from a centralized cloud management tool, Accelerated View™. In addition to configuration details, the Accelerated View management portal provides the following capabilities for your Accelerated 5301-DC.
™ The following Accelerated View actions are typically only performed by your network administrator. If you do not have a user ID and password to access Accelerated View, contact your network administrator or find more information at www.accelerated.com/support. Viewing & Editing Configuration To access the configuration for your device: 1.
Upgrading Firmware ACCELERATED.COM The firmware version of your device is determined by the version defined in the Accelerated View configuration linked to the device. If your account administrator or support technician has advised you to change or upgrade the firmware on the device, perform the following steps: 1.
To manually connect to the device using the device’s default IP address (192.168.210.1), you must manually set an IP address on your PC to be able to communicate with the Accelerated 5301-DC. 1. Select the Properties of the relevant network connection on the Windows PC.
To manually connect to the device, you must manually set an IP address on your PC to be able to communicate with the Accelerated 5301-DC. If you have not set an IP address on your PC refer to the section above, Manually Configuring PC to Connect to Device, before attempting to login 1.
Manual Firmware Update ACCELERATED.COM If the device firmware cannot be updated using Accelerated View, a backup solution is to manually install firmware by accessing the device locally. If your account administrator or support technician has advised you to change or upgrade the firmware on the device, perform the following steps: 1.
• Metric • DNS Address(es) NOTE: If you are using Accelerated View to manage your 5301-DC device, you will need to configure these same static IP settings in the configuration profile of the 5301-DC in Accelerated View. Refer to the "Viewing & Editing Configuration"...
Specifications ACCELERATED.COM Accelerated 5301-DC Cellular Extender Telco: V.34 / RJ11 Power Supply: 12V DC, 1.5A; 100-240 AC Dimensions: 4.2 x 4.2 x 1.00 inches (108 x 108 X 25 mm) Weight: 6.4 ounces (180 Kgs) Temperature: 32º to 104º F (0º to 40º C) Operating Certifications: FCC Part 15, Subpart B, Class A;...