Beko DDT28430X User Manual page 36

UPPER IMPELLER
Check if the holes on the upper impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Turn its nut to left
to remove the upper impeller (A, B).
Make sure that the nut is tightened well
when installing the upper impeller.
1
C
CEILING IMPELLER
(MODEL DEPENDING)
Check if the holes on the top ceiling
impeller (1) of your machine are clogged. If
they are clogged, remove and clean.
To remove them, slightly ( ) push them
upwards and then (
To install the impeller, seat it into its
slot, push slightly upwards and turn it
rightwards until it is securely tightened.
When the impeller is released, check if it
rotates without any obstruction.
A
1
B
34
USA
) turn left (A,B).
A
B
C