Setting The Alarm; Temperature Readout; Maintenance And Safety Instructions - Velleman WT82 User Manual

5. Setting the Alarm

Press the ALM SET button once to display the current alarm time for ± 30 seconds. Hold ALM SET for two seconds
when you press it for the second time. This activates the alarm-setting mode. The digits for the month start to flash.
Enter the month with ▲ or ▼ and confirm with ALM SET. The digits for the date start to flash. Adjust the date with UP
or DOWN and confirm with ALM SET. The digits for the hours start to flash. Enter the hours with UP or DOWN and
confirm with ALM SET. The digits for the minutes start to flash. Enter the minutes with UP or DOWN and confirm with
ALM SET. The device returns to the normal alarm mode display. Press TIME SET to return to the normal display mode.
Press the ALM ON/OFF button. The
alarm will sound for 1 minute at the programmed time, unless you press ALM ON/OFF or TIME SET to deactivate the
alarm.
Press the ALM ON/OFF button twice to display both the
function is also activated (activation delay is ± 5 minutes).
Put the digits for the month and the date in the "-" position to use the alarm as a daily alarm.
The alarm will sound for 1 minute at the programmed time. Press the SNZ LIGHT button while the alarm is sounding to
arm the snooze function or press ALM ON/OFF or TIME SET to deactivate the alarm and the snooze function (for 24
hours if the alarm is used as a daily alarm).

6. Temperature Readout

Press the °C/°F button when the device is in the normal display mode to toggle between °C and °F for the temperature
readout.
7. Selecting 12hr- or 24hr-Mode
Press the "12/24" button when the device is in the normal display mode to toggle between 12hr- and 24hr-mode for the
time display.

8. Maintenance and Safety Instructions

• Protect the device against moisture and dust.
• Keep the device away from magnetic objects.
• Every electromagnetic field of min. 8kV will cause the device to malfunction and will force you to reinstall the
batteries.
• Remove the batteries immediately when they're exhausted and when the device is not to be used for a prolonged
period.
• Respect your local and national laws when disposing of the exhausted batteries.
• Use a soft cloth moistened with mild detergent to clean the device.
• Do not use abrasives or solvents on the device.
• Do not drop the device on a hard surface.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
WT82_v2
symbol should now appear on the LCD to indicate that the alarm is armed. The
symbol and the
3
symbol. This indicates that the snooze
VELLEMAN