CV6B ManualEN 022708.qxp
• Connect converter's power cord to 120 volt AC outlet.
• Plug the 12 volt DC-powered device into the converter's socket and operate normally.
• Remove 12 volt DC plug from converter.
• Disconnect converter's power cord from 120 volt AC outlet.
• Allow converter to cool for at least 30 minutes before storing.
CARE AND MAINTENANCE
• Do not immerse converter in water.
• Wipe outside surface of the converter with a damp cloth. The use of any other
material may cause permanent damage and will void the warranty.
Recommended accessories for use with your tool are available from your local dealer
or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool
could be hazardous.
No output from converter • 12 volt DC plug not making good connection in socket
– rotate plug in socket.
• Dirty contacts in 12 volt DC socket – with power
disconnected, clean socket and reinsert plug.
AC power is not available
Check AC outlet by plugging in another appliance. If
outlet has no power, check fuses, circuit breakers and
wall switches to restore power.
Fuse is blown (open)
Return unit to manufacturer for repair. There are no
user servicable parts in this converter.
All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker
location nearest you. To find your local service location, refer to the yellow page
directory under "Tools—Electric" or call: 1-800-544-6986 or visit
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no
charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer
from whom it was purchased (provided that the store is a participating retailer).
Returns should be made within the time period of the retailer's policy for exchanges
(usually 30 to 90 days after the sale). Proof of purchase may be required. Please check
with the retailer for their specific return policy regarding returns that are beyond the
time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned
or authorized Service Center for repair or replacement at our option. Proof of purchase
may be required. Black & Decker owned and authorized Service Centers are listed
under "Tools-Electric" in the yellow pages of the phone directory and on our website
This warranty does not apply to accessories. This warranty gives you specific legal
rights and you may have other rights which vary from state to state or province to
province. Should you have any questions, contact the manager of your nearest Black &
Decker Service Center. This product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
1-800-544-6986 for a free replacement.
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
BEFORE RETURNING THIS PRODUCT
BEFORE YOU CALL, HAVE THE CATALOG No, AND DATE CODE
AVAILABLE. IN MOST CASES, A BLACK & DECKER
REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE
PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE
US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER.
– Yellow Pages –
for Service & Sales
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Catalog Number CV6B
to register your new product
FOR ANY REASON PLEASE CALL
Copyright © 2008 Black & Decker
Printed in China