Setting The Reference Time - Aviator MIG-29 CHRONO User Manual

Reference time
Reference time
Alarm time
please note:
* In order to set the time to the exact
second, 0 must be pulled out when
the second hand is in position «60»
(Ill ). Once the hour and minute
hands have been s et, 0 must be
pushed back into position I at the exact second.
MIG-29 CHRONO
English User Manual

sEttING tHE REfERENCE tIME

1
2
Small minute hand
3
4
9
*Pull out the crown to position Ill (second hand stops
The display changes from alarm time to reference
time.)
Activating the setting mode
Press the push-button for at least 2 seconds. As soon
as the small minute hand jumps forwards one minute,
this mode is active.
short pressing (less than 1 second):
the reference time is moved forwards by the minute.
Medium pressing: (1-2 seconds):
the reference time is moved forwards by the hour.
long pressing (longer than 2 seconds):
the reference time is moved forwards until the push-but-
ton is released.
*Push the crown back into pos ition I (the display
changes from refe rence time to alarm time). A signal
indicates that the alarm is switched off.
what is the reference time?
The current time is displayed by means of the
hour and minute hand.
Parallel to the current time, the reference time
runs in the background the alarm time refers
itself to this reference time Thus, resetting the
time also requires the identical correction of
the reference time.
If the reference time is not synchronised with
the current time, this results in the a larm
signal being emitted at a different time to the s
et a larm time.
RONDA 5130.D