License Plate Lamp; Replacement Bulbs - Chevrolet sonic 2017 Owner's Manual

License Plate Lamp

Lamp Assembly
Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the left end of the lamp
assembly toward the right.
2. Turn the lamp assembly down
to remove it.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket
and turn the bulb socket
clockwise to install it into the
lamp assembly.
6. Turn the lamp assembly into
the lamp assembly opening
engaging the clip side first.
7. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Vehicle Care

Replacement Bulbs

Exterior Lamp
Back-Up Lamp
Front Fog Lamp
Front Turn 7444NA-M
Signal Lamp
High-Beam
Headlamp
License Plate Lamp
Low-Beam
Headlamp
Rear W21W LL
Sidemarker Lamp
Rear Turn
Signal Lamp
Stoplamp/Taillamp W21W LL
For replacement bulbs not listed
here, contact your dealer.
241
Bulb
Number
W16W
PSX24W
HB3LL
W5W LL
H11 LL
WY21W