Table of Contents
Advertisement
other end to the audio jack on your PC.
Connecting as a TV
Cable TV
•
Antenna
•
TV to VCR
Cable TV
1. If your Cable TV signal is a single, round cable (75 ohm), then you're ready to connect to the TV.
Connect the TV cable to the ANTENNA/CABLE plug on the TV.
2. If you have a cable converter box, connect the cable TV signal to the IN (put) plug on the converter,
connect the OUT(put) plug from the converter to the 75
3. Verify that the On Screen Display (OSD) is set to Cable.
Note: The connecting cable for the converter is supplied by the Cable TV company.
(ohm) plug on the TV.
Advertisement
Table of Contents
