Hotpoint CSX20 How To Get The Best page 9

4?
To
Remove
Sealed & Fresh Drawer Cover
(Model CSX22)
1. Reach in, push down on the top
surface of the flexible air duct cover
and pry its top edge out from under
the louvered vent attached to rear
wall.
2. Lift bottom of air duct cover
out of groove on gasket attached to
rear of glass cover. Remove air duct
c
j ,over from cabinet.
r-h
it back until it clears front-corner
retainers.
After cleaning, replace in reverse
order.
3. Pull the drawer part-way out.
Reach in, push the rear of the glass
cover up and, at the same time, push
\
\
4. Tilt and remove the cover.
To replace:
1. Put gasket on rear of glass cover
if removed for cleaning.
2. Put glass cover back in place.
I I
4. Push top edge of air duct cover
into place under louvered vent.
3. Insert the bottom of the air duct
cover into the groove in the gasket
on the glass cover.
To Retnove
Drawers
(Model CSX22)
1. Remove Sealed & Fresh drawer
cover. See instructions at left.
2. Pull out Sealed & Fresh drawer
just past stop, then tilt and remove.
3. Slide the L
I
(!7
plastic cover ,,/
(4
forward until
the notch on
*IJ /L—
'\ I .
lines up with
the tab on
"/;1]S
SJ9Z 92
the cover
I
4. Tilt and
remove the
cover.
5. Tilt and
remove the
Convertible
Meat Pan
drawer.
Rubber gasket on rear of glass
cover can be removed for cleaning.
9
Part No. 467733P01