Brief introduction KP310 smart controller is used for controlling turning on/off, and monitoring running status of a single generating set. The function of this controller contains manual turning on/off, remote operation, data measurement, alarm protection and so on.It displays working status and alarm information via digital tubes.The...
Page 3
KP310 Panel KP310 Panel KP310 Panel KP310 Panel Model KP310V1.0 Model KP310V1.0 Model KP310V1.0 Model KP310V1.0 Model KP310V1.0 Model KP310V1.0 Model KP310V1.0 Model KP310V1.0...
Page 4
Features • Microprocessor as the core, high integration of hardware, and more reliable. • Digital tube display, touch-button, easy operation. • Manual/remote operation of generator turning on/off. • Connecting RS232 with PC to realize operating and monitoring generator,connecting RS485 to communicate with remote terminal control module to realize remote monitoring.
Page 5
• Adapt to three-phase four-line, three-phase three-line, single- phase two-line, double-voltage output. • Collect and display data of three-phase voltage, three-phase current, frequency, rated speed and battery voltage. • Detection on over-voltage, under-voltage, over-frequency, under-frequency and charging failure. • Signal input of high water temperature and low oil pressure. •...
Page 6
(screen and controller), compared with that • for KI panel. • 3. Compared to the KI panel, the connection cable of KP310 is reduced by more than half,this greatly decreases the connection fault and saves the cost of panel maintenance and replacement.
Page 7
• 6. The human-machine interface of KP310 panel is more adapted to user’s operation habit, without any high requirement to the operators. • 7. The program design of KP310 panel is more compliable and compatible to the control flow of generator industry.
Page 8
• 9. The designing of wiring for components and connectors is more reasonable which contributes to a lower failure rate on KP310 panel than KI panel. • 10. KP310 panel with ATS connector,which could be connected directly with a new ATS that can realize the remote control for screen, on which the mains and genset voltage could be monitored, along with AMF(automatic management failure) alarm.