Using Your Blender - Oster BLSTSR-PZ0 User Manual

Using Your Blender

F 1
igure
1. Clean Blender according to the instructions in the "Cleaning and Storing
Your Blender" section. (Page 7)
2. Turn Blender Jar upside down so the small opening is at the top. (Figure 1)
3. Place Sealing Ring over Blender Jar opening. (Figure 2)
4. Place Blade System into Blender Jar. (Figure 3)
5. Place the Threaded Bottom Cap on Blender Jar and turn it clockwise to
tighten. (Figure 4)
6. Place Blender Jar assembly onto Blender Base. (Figure 5)
7. Line up tabs on Blender Base. Make sure the tab on the jar (near the
handle) is in front of the tab on the Blender Base. (Figure 6) Blender Jar
should now be seated into position.
8. Place ingredients into Blender Jar.
NOTE: For best results, always add liquids first when blending, unless
a recipe says otherwise.
9. Place Blender Lid with Filler Cap on Blender Jar.
10. Press OFF before plugging into an electrical outlet.
F 4
igure
F 2
igure
F 5
igure
5
F 3
igure
F 6
igure