Differential Gear Oil - Yamaha GRIZZLY 350 YFM35FGDZ Owner's Manual

1 2
3
4
1. Final gear oil filler bolt
2. O-ring
3. Final gear oil
4. Correct oil level
8
Recommended final gear oil:
See page 10-1.
TIP
If the recommended oil is not available, SAE80W-
90 API GL-5 Hypoid gear oil may be used instead.
However, when using this oil, noise from the final
gear case may occur when applying the rear
brake.
7. Install a new O-ring and the oil filler bolt, and
then tighten the bolt to the specified torque.
Tightening torque:
Final gear oil filler bolt:
24 Nm (2.4 m·kgf, 17 ft·lbf)
8. Check the final gear case for oil leakage. If oil
is leaking, check for the cause.
9. Install the engine guard and the final gear
case guard by installing the bolts, and then
tightening them to the specified torques.
Tightening torques:
Engine guard bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Final gear case guard bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
EBU23425

Differential gear oil

The differential gear case must be checked for oil
leakage before each ride. If any leakage is found,
have a Yamaha dealer check and repair the ATV.
In addition, the differential gear oil level must be
8-18