Audio Authority 947 Diagram

5.1 Channel Surround or ProLogic Receiver
This diagram shows connections to receivers with video on-screen programmability, digital audio inputs, and
a low-level sub out jack. If a receiver does not have some of the features shown, simply leave those jacks or
terminals vacant on the 947. Always connect the A/V cables to the VCR 1 or Video 1 jacks on the receiver. To
prevent a blank screen when switching from a GUI reciver to a non-GUI receiver, you should install a 986
Video AutoPatcher in your system. There is no optical digital connection on the 947 – use the coax input on
digital audio receivers, or use Model 977T Coax to Optical Adapter. Instructions for other types of surround
sound configurations are available if needed. Contact your Audio Authority
System Bus
Connections
Group
Address
Setting
Module
Address
Settings
RECEIVER BUS
Indicator/PSB
IN
Connections
Stereo Audio
Low Level
Bus Connections
(input from source)
Digital Audio (Coax)
Bus Connections
(input from source)
Digital Audio (AC-3/RF)
Bus Connections
(input from source)
Video
Bus Connections
(input from source)
Video
Bus Connections
(output to monitor)
Sub Out
Bus Connections
(output to Subs)
Front
Speaker Output
Bus Connections
(IN & OUT)
FRONT
SPEAKER BUS
CENTER
SPEAKER BUS
Center
Speaker Output
Bus Connections
(IN & OUT)
Surround
Speaker Output
Bus Connections
(IN & OUT)
SURROUND
SPEAKER BUS
ASD
Phone: 859-233-4599 Fax: 859-233-4510
947 Receiver Selector
POWER
ASD
Model 947
SYSTEM
Audio/Video Receiver Selector
BUS
SOURCES
1 2 3
OUT
LEFT AUDIO
RIGHT AUDIO
DIGITAL AUDIO INPUT
AC-3 RF INPUT
COMPOSITE VIDEO INPUT
COMPOSITE VIDEO OUTPUT
SUBWOOFER OUTPUT
( L+ L– R+ R– )
FRONT SPEAKER OUTPUT
1 2 3
( + – )
CENTER SPEAKER OUTPUT
( L+ L– R+ R– )
SURROUND SPEAKER OUTPUT
Tech Support USA and Canada: 800-322-8346 (Mon-Fri 8:30 AM to 5:00 PM Eastern Time)
LEFT
OUT
701-1087
IN
COAX
DIGITAL IN
Indicator/PSB
4
S
PSB
(Optional)
Position #4
RCVR INPUT
Stereo Audio
Product Position #4
RCVR DIGITAL
AUDIO INPUT
Product Position #4
RCVR
VIDEO IN/OUT
Product Position #4
RCVR SUB OUTPUT
Product Position #4
RCVR FRONT
OUTPUT
Product Position #4
4
RCVR CENTER
OUTPUT
Product Position #4
RCVR SURROUND
OUTPUT
Product Position #4
S-Video Expander
(optional)
Connection Here
Hookup drawings and FAQ http://www.audioauthority.com
® at the phone number below.
VIDEO 1
Dolby Digital or
AUDIO
RIGHT VIDEO
ProLogic Receiver
OUT
+ R –
AC-3
+ R –
RF IN SUB OUT
Wire Color Code
Green L+
White L–
FRONT CENTER
+ L – + –
A
B
+ L – + R – + L –
REAR
Brown R+
Gray R–