Get Started; Set Time, Date And Temperature Units - La Crosse Technology 308-1414W Instruction Manual

Battery
Compartment
3 "AAA"
AC Power
1: Insert the included 5-volt AC power adapter into the weather
station and then into wall outlet.
2 (Optional): Insert 3 new "AAA" batteries (not included) into
the weather station. Observe the correct polarity.
3: Insert 2 new "AA" batteries (not included) into TX141TH-Bv2
sensor. Observe the correct polarity. The red LED will flash
when transmitting.
4: After 5 minutes, place sensor in a shaded outdoor location.

SET TIME, DATE AND TEMPERATURE UNITS

Note: Only press or hold one button at a time.
1. Hold the TIME SET button 3 seconds to enter time set mode.
2. Press and release the ▼ or ▲ buttons to adjust values.
3. Press and release the TIME SET button to confirm adjustments and
move to the next item.
Settings order:
1. WWVB ON/OFF
2. Time Zone
3. Daylight Saving Time
4.12/24 Hour Time Format
5. Hour
6. Minutes
7. Year,
8. Month
9. Date
10. Fahrenheit/Celsius
308-1414B / 308-1414W
Jack

GET STARTED

www.lacrossetechnology.com/support
BACK
VIEW
Battery
Cover
Base
Stand
Page | 2