Table of Contents
Advertisement
BLIND SPOT INFORMATION (BSI) SYSTEM
Assists you in determining if there are detected vehicles in your blind spots. Available on
Touring Elite.
How It Works
A radar sensor on each corner of the rear bumper alerts you when it detects a vehicle
in your left or right blind spots. Minimum operating speed is 20 mph.
When a vehicle is detected in your
blind spot, the blind spot indicator turns
on and stays lit until the area is clear.
When your turn signal is on and a
vehicle is detected, the blind spot
indicator blinks and a beep sounds until
the area is clear or the turn signal is off.
Changing Settings
Determine the warning type, or turn the system off.
1. Press SETTINGS. Use the interface
dial to make and enter selections.
2. Select Vehicle Settings.
3. Select Driver Assist System Setup.
4. Select Blind Spot Info.
5. Select an alert type, or turn the
system off.
6. Press BACK to exit the menu.
2
Left BSI indicator shown
PARKING SENSOR SYSTEM
Warns you of the proximity between your vehicle and nearby surrounding objects
when parking or backing up.
How It Works
When the system senses an object, an indicator appears on the MID and center display
screen and a beep sounds. As you get closer to the object, the beep rate increases.
Corner sensors
Within about 2 ft.
Turning the System On and Off
Press the parking sensor
button. A light appears
when the system is on.
Rear center sensors
Within about 3.5 ft.
21
Advertisement
Table of Contents
