2-1. SERVICE MODE
• By using remote commander (RM-1028), all circuit
adjustment can be made.
2-1-1. METHOD OF SETTING THE SERVICE
MODE.
1.
Standby mode. (power off)
2.
On the remote command button. (Press each button within a
second)
DISPLAY → 10KEY<5> → VOL<+> → POWER
2-1-2. ADJUSTMENT ITEMS AND KEY
OPERATION.
ITEM
Change the Category
Change the Item
Change the Value
Read Data from NVM
Write Data to NVM
Test Reset NVM Data
2-1-3. METHOD OF ENDING SERVICE MODE
• When ending service mode, turn the power switch OFF on the
remote commander or the main unit.
SECTION 2
ADJUSTMENTS
KEY OPERATION
2 (UP), 5 (down)
1 (UP), 4 (down)
3 (UP), 6 (down)
7 → -
MUTE → -
8 → -
KE-MR50M1 (CH)
2-1