Magma
Attach Power Cord
Connect Thunderbolt Cables
Attach Thunderbolt cable into either top or bottom port on the ExpressBox 3T. Plug in Display Monitor, DVI/HDMI,
or Display. If no display will be used, you can daisy chain other Thunderbolt devices. Plug in the other end of the
Thunderbolt cable to the Thunderbolt port on the computer.
Attaching Displays
You can use an appropriate Display Port connector to add a Display Port, HDMI, DVI, or VGA Display.
The Display Port connector can plug into the other Thunderbolt port on ExpressBox 3T
Make sure your display is plugged in and the appropriate adapter is connected.
ExpressBox 3T | Chapter 2
Hardware Installation
20