EBU26921
Tail/brake light
This model is equipped with an LED type of
tail/brake light.
If the tail/brake light does not come on, have a
Yamaha dealer check it.
EBU25652
Removing a wheel
1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Wheel nut
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU27483
Installing a wheel
1. Install the wheel and the nuts.
TIP
When installing the wheel, make sure its arrow
mark
points toward the rotating direction of
the wheel.
1. Arrow mark
2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
torques.
8-48
8