1. Final gear oil drain bolt
5. Install the drain bolt, and then tighten it to the
specified torque.
8
Tightening torque:
Final gear oil drain bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
6. Add the recommended final gear oil to the
brim of the filler hole as shown.
1. Final gear oil filler bolt
2. Correct oil level
3. Final gear oil
Recommended final gear oil:
See page 10-1.
NOTE:
If the recommended oil is not available, SAE80W-
90 API GL-5 Hypoid gear oil may be used instead.
However, when using this oil, noise from the final
gear case may occur when applying the rear
brake.
8-16