Toro 30716 Operator's Manual page 6

100-6578
1. Entanglement hazard
2. Keep the cutting unit
covers in place.
93-7818
1. Warning—torque the blade bolt. Read the operator's manual
for further instructions.
85-6120
3. Stay away from moving
parts.
1. Change the oil every 50 hours. Read the operator's manual for
further instructions.
105–7844
1. Warning—read the operator's manual.
2. Rear wheel weight is required when operating a two-wheel
drive Groundsmaster 328–D or Groundsmaster 345.
1. Height-of-cut adjustment
6
93-6697
93-7826