Change Individual Clock Or User Profile Settings; Alarm; Pulse Meter / Stress Index (Available In Pe826 Only) - Oregon Scientific PE823 User Manual

CHANGE INDIVIDUAL CLOCK OR USER
PROFILE SETTINGS
If after the initial setting of the clock / user profile (as
detailed in previous section), you wish to change the clock
time or edit one of the user profile settings, simply:
1. Press MODE to navigate to Clock or User Profile
Mode.
2. Profile Mode only; use
you wish to change.
3. Press and hold SET to enter setting mode.
4. Press / to change a value and SET to confirm.

ALARM

When in the Clock Mode, press
Clock and Alarm Mode.
To set the alarm:
1. Press MODE to navigate to Clock Mode.
2. Press to switch
to Alarm Mode.
3. Press and hold SET to enter the setting mode.
4. Press / to change a value and SET to confirm
and move on to the next setting.
PE82X_M_EN_V2.p65
/ to scroll to the setting
to toggle between the
9
9
5. The setting sequence is:
• Hour • Minute
To stop the alarm sound, press any key
PULSE METER / STRESS INDEX
IN PE826 ONLY)
For first-time use, or after replacing a battery or
resetting the unit, user must calibrate stress index
baseline, otherwise no valid reading can be obtained.
To calibrate your stress index baseline:
The index is highly individual, so you need to calibrate
your personal baseline before you use this function to
monitor your stress status.
Make sure you relax for 2 to 3 minutes before you start
the calibration:
1. Press to enter Pulse Mode.
2. Press to enter
calibration setting.
3. Press and hold SET to start calibration.
2005.7.19, 12:17 PM
• On / Off
(AVAILABLE