Image Express Utility; Network Service - NEC NP-CR5450H User Manual

7-5. IMAGE EXPRESS UTILITY

Configure the settings when using Image Express Utility Lite.
Item Description
Mode Select the operating mode.
Free: Set the free mode.
Control: Set the managed mode.
HTTP Password Able to setup a password to log in the MANAGED MODE
for the IMAGE EXPRESS UTILITY in the WEB SERVER
functions
NOTE:
• If you change the setting of the operating mode, connecting to the IMAGE EXPRESS UTILITY, it will not be reflected immediately.
When the IMAGE EXPRESS UTILITY becomes unused condition, the change in the operating mode will be reflected.

7-6. NETWORK SERVICE

AMX setting
If you connect this device to a network compatible with the NetLinx control system of AMX Corporation, you can en-
able/ disable the detection setting from AMX Device Discovery. A check mark is not when the device is first shipped
from the factory.
See the website of AMX Corporation for more information on AMX Device Discovery.
HTTP server configuration
Set the password for logging into the PROJECTOR CONTROL screen. A maximum of up to 10
alphanumeric characters can be set for the password.
PJLink setting
Set the login password for using PJLink. A maximum of up to 32 alphanumeric characters can be set for the pass-
word.
Alert e-mail setting
When using this device connected to a network, computers and other devices will be notified of the status of this
device via e-mail if the lamp of this device is due for replacement, or if an error occurs.
ALERT MAIL
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS
1, 2, 3
This option will notify your computer of lamp replace time or error messages via e-mail
when using wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME : PJ-XXXXXXXX
LIGHT HOURS USED : XXXX[H]
Enter sender's address.
Enter the SMTP server name to be connected to the projector.
Enter your recipient's address. Up to three addresses can be entered.
29
7. NETWORK SETTINGS
Remarks
The default factory setting when
shipped is "Free".
Max 32 alphanumeric charac-
ters. If it leaves in blank, the
password becomes "Null". De-
fault setting: Blank