Table of Contents
Advertisement
Hardware Installation
Inspect the DVR Packaging and Check Contents
Upon receiving your DVR, please check for any visible damage to the external
packaging. If the external packaging is damaged, please document the
damage and report to the shipping agent. The protective materials used in
packaging of the DVR can protect against most accidental damage during
shipping and should be saved. Immediately after opening the box, please
check the items included in the accessory kit against the packing list. Finally,
remove the DVR from the packaging materials.
HDD Installation
The DG-CD2030HD series DVR may contain only one SATA HDD. If installing
or upgrading, please use a HDD of 7200rpm or higher which is specially
designed for DVR applications.
Please follow the instructions mentioned below to install/upgrade the HDD.
NOTE: The below shown product images are for illustration purpose only.
Actual product may vary.
1. Remove the screws connecting
the cover.
4. Mount the HDD using the four
holes in the chassis.
2. Remove the cover.
5. Turn the DVR over.
6
3. Kindly match four screw holes of
casing the HDD with DVR button.
6.
Tighten
the
screws
attaching the HDD to the
chassis.
Advertisement
Table of Contents
