Summary of Contents for FabiaTech FB4070
- Page 1 FabiaTech Corporation IPC Solution Website: http://www.fabiatech.com Email: support@fabiatech.com Expansion Card PCIe 4LAN/PoE Card FB4070 User’s Manual MAR 2016 Version: 1.1 Part Number: FB4070...
- Page 2 FabiaTech shall not be reliable for technical or editorial errors or omissions, which may occur in this document. FabiaTech shall not be reliable for any indirect, special, incidental or consequential damages resulting from the furnishing, performance, or use of this document.
-
Page 3: Table Of Contents
CN2: 4 LAN Ports RJ45 Connector..............9 CN1 & CN7: DC-In Terminal Block Connector ..........10 Install FB4070 PCIe PoE/LAN card to System- Host Computer ....11 Chapter 3 Software Installation and Setting ................13 LAN Driver (Intel I210AT).......................13 WIN7/8/8.1 Server 2008 R2/2012 R2 X86/X64 Driver ..........13 LAN Driver Configuration Setting ..................16... -
Page 4: Chapter 1 Introducing The Fb4070 Pcie/Poe 4 Lan Card
Chapter 1 Introducing the FB4070 PCIe/PoE 4 LAN Card Overview The FB4070 is x4 PCIe/PoE Giga LAN card with support for four PoE ports independent Intel® i210AT Gigabit Ethernet. The FB4070 supports IEEE802.3af/at Power over Ethernet (PoE) Power Sourcing Equipment (PSE) and can detect an IEEE802.3af/at compliant Powered Device (PD). -
Page 5: Series Comparison Table
FabiaTech Corporation Series Comparison Table Model FB4070 LAN Chipset Intel ® i210 RJ45 LAN port Four (100/1000Mbps) Jumbo Frame Link Aggregation (LAG) PoE Capability * IEEE 802.3af Compliant Each port up to 15.4W IEEE 802.3at Compliant Each Port up to 25.5W... -
Page 6: Layout
FabiaTech Corporation Layout... -
Page 7: Specifications
LAN Data access PoE Powered Device (PD) connectivity status Power requires Base on FB4070:+3.3V/2.4A, +12V/220mA Max. PoE Power Input: 48V/1.6A Max. (Power consumption: 75W Max.) PoE Power Input: 48V/2.5A Max. (Power consumption: 120W Max.) 48VDC Terminal Block power input for 15.4W or 25.5W per PoE port EMI Considered on every output signals. -
Page 8: Packing List
Verify the accessories in the package according to the packing list and see if there is anything missing or incorrect package is included. • If the cable(s) you use to install the FB4070 is not supplied from us, please make sure the specification of the cable(s) is compatible with the FB4070 system board. - Page 9 FabiaTech Corporation...
-
Page 10: Chapter 2 Hardware Installation
If not, this may damage the system board components, module, or the FB4070 card. 3. The FB4070 can be installed in a PCI Express x4, x8, or x16 slot. And please make sure that there PCI Express slot available on your system board. Before you install... -
Page 11: Hardware Features
FabiaTech Corporation Hardware Features The following lists the connectors and jumpers to install the FB4070. Item Description Internal PoE power connector with 2-pin DC-In terminal block 4 LAN Ports and LED’s status with RJ45 Connector External PoE power connector with 2-pin DC-In terminal block... -
Page 12: Cn2: 4 Lan Ports Rj45 Connector
DC_0V CN2: PoE LAN LED Power Status The FB4070 provides green LED to indicate operating conditions of the PoE LAN ports. The green LED is on while connect to Powered Device (PD) and it is off when the Powered Device (PD) is removed. The table below is to illustrate PoE LED status. -
Page 13: Cn1 & Cn7: Dc-In Terminal Block Connector
FabiaTech Corporation CN1 & CN7: DC-In Terminal Block Connector The PoE power source comes from either the CN1 or CN7, DC-in terminal block al block connectors, both of which are connected to external power source 48~55 VDC input. connectors, both of which are connected to external power source 48~55 VDC input. -
Page 14: Install Fb4070 Pcie Poe/Lan Card To System- Host Computer
Install FB4070 PCIe PoE/LAN card to System- Host Computer If installing the FB4070, can remove the chassis cover of host computer then insert to x4 PCI Express slot (Or x8, x16 slot). Below example: Install FB4070 PCIe PoE LAN card to FX5637S1 system. (Please see the spots circled.) a. - Page 15 Installing FX5637K2 Kit (Optional) - Expansion card holder FX5637K2 (O PTIO N) c. Connector External VDC Power Supply to CN7 of FB4070 Note: 1. The PoE of PD needs using the CN1 or CN7 to connect with external power supply DC-IN +48V ~55V input (+48V/2.4A Max).
-
Page 16: Chapter 3 Software Installation And Setting
Chapter 3 Software Installation and Setting Chapter 3 Software Installation and Setting The enclosed CD diskette includes FB4070 LAN driver. To install driver and configure The enclosed CD diskette includes FB4070 LAN driver. To install driver and configure setup you FB4070 card, you need to perform the following steps. - Page 17 FabiaTech Corporation Step 3: Click “Next “to License Agreement. (Need select “I accept the teams in the license agreement”.) Step 4: Click “Next” to continue installation. Step 4: Click “Finish” to Install wizard completed!
- Page 18 FabiaTech Corporation Step 5: You will see the 4 Intel ® i210 Gigabit Network Connection LAN device completed show the Device Manager!
-
Page 19: Lan Driver Configuration Setting
FabiaTech Corporation LAN Driver Configuration Setting The LAN configuration setting with scroll down to and double-click the "Network adapters" header in the Device Manager list. Right-click the Intel ® i210 Gigabit Network Connection and click "Properties" on the context menu. The context menu settings listed in the "Advanced"... - Page 20 FabiaTech Corporation Performance Options Receive Buffers and Transmit Buffers are sets the number of Buffers used by the adapter when copying data to memory. Increasing this value can enhance receive performance, but consumes system memory. Receive Buffers You might choose to increase the number of Receive Buffers if you notice a significant decrease in the performance of received traffic.
- Page 21 FabiaTech Corporation Transmit Buffers You might choose to increase the number of Transmit Buffers if you notice a significant decrease in the performance of transmit traffic. If transmit performance is not an issue, use the default setting.
-
Page 22: Chapter 4 Technical Reference
This section provider description the hardware that may occur when you operate the system, and also gives you the suggestions on solving the problems. Topic include: Technical Reference FB4070 Dimension Technical Reference Physical and Environmental Temperature: Operating 0°C ~ 60°C Relative humidity 5 % to 95 % non-condensing For PoE input Power Supply: Input AC Voltage Range: 115V/2A~230V/1.2A, 50Hz ~60Hz... -
Page 23: Appendix
FabiaTech Corporation Appendix Dimension 167.7 48Vin 48Vin...
Need help?
Do you have a question about the FB4070 and is the answer not in the manual?
Questions and answers