Frigidaire 650 series Use & Care Manual page 5

Hide thumbs Also See for 650 series:
Table of Contents

Advertisement

Operating Instr
Operating Instr
Operating Instr
Operating Instructions
Operating Instr
W W W W W ash Cycle Selections
ash Cycle Selections
ash Cycle Selections
ash Cycle Selections
ash Cycle Selections
Note: Cycle times are approximate and will vary with options selected. Not all cycles available on all
models.
Cycle
Description
Pots &
For pots, pans,
casseroles, and
Pans
dinnerware with dried-
on or baked-on soils.
Heavy
For heavily soiled
Wash
dishes and silverware.
Normal
For regularly soiled
dishes and silverware.
Wash
Light
For lightly soiled or
pre-rinsed dishes and
Wash
silverware.
Rinse/
For rinsing dishes that
Hold
will be washed later.
* Includes dry time.
Ener
Ener
gy Options
gy Options
Ener
Ener
Energy Options
gy Options
gy Options
Hi-T
Hi-Temp W
Hi-T
emp Wash Option
emp W
emp W
ash Option
ash Option
ash Option
Hi-T
Hi-T
emp W
ash Option
When HI-TEMP WASH ON option is selected,
the dishwasher heats the water in the main
wash to approximately 140°F (60°C). Wash
action will continue but timer will not advance
until proper temperature is reached. The hotter
water provided by this option helps activate
dishwasher detergent to clean food grease and
soil from dishes. HI-TEMP WASH ON option
can be used with any cycle except RINSE/
HOLD.
To turn off option, select HI-TEMP WASH OFF.
Sanitize Option
Sanitize Option
Sanitize Option
Sanitize Option
Sanitize Option
To sanitize your dishes and glassware, select
the SANITIZE ON option. The water
temperature in the final rinse will be raised to
155°F (68°C) and will maintain that temperature
for 9 minutes. This option is available in Pots &
Pans, Heavy, Normal and Light cycles. The
cycle time will be extended until the proper
water temperature is reached. Washing action
will continue during the water heating delay. For
best results, the incoming water temperature
should be at least 120°F (49°C).
The sanitize criteria may not be satisfied if there
uctions
uctions
uctions
uctions
Cycle Chart
To Select Cycle
• Turn dial to POTS & PANS/HEAVY
WASH.
• Select HI-TEMP WASH ON option.
• Select other desired OPTIONS.
• Turn dial to POTS & PANS/HEAVY
WASH.
• Select desired OPTIONS.
• Turn dial to NORMAL WASH.
• Select desired OPTIONS.
• Turn dial to LIGHT WASH.
• Select desired OPTIONS.
• DO NOT USE detergent.
• Turn dial to RINSE/HOLD.
• Select SANITIZE OFF and HEAT
DRY OFF/POWER DRY OFF.
5
(continued)
(continued)
(continued)
(continued)
(continued)
Water
(approx.)
7.2
gal.
6.0
imp. gal.
27.3
liters
7.2
gal.
6.0
imp. gal.
27.3
liters
6.0
gal.
5.0
imp. gal.
22.7
liters
4.8
gal.
4.0
imp. gal.
18.2
liters
1.2
gal.
1.0
imp. gal.
4.5
liters
is an interruption of the cycle, power failure, or if
the incoming water temperature is below 120°F
(49°C).
Heat Dry Option
Heat Dr
Heat Dr
Heat Dr
Heat Dr
y Option
y Option
y Option
y Option
HEAT DRY ON/POWER DRY ON option provides
faster drying since the heating element is on
during the drying portion of cycle.
HEAT DRY OFF/POWER DRY OFF option saves
electricity since the heating element is off during
the drying portion of cycle. To speed drying
process, open the door slightly after the cycle is
complete. Some water droplets may remain on
door and tub and in areas where dishes touch
silverware basket and rack.
With either option, you may see water vapor
coming from vent during drying portion of cycle.
The vent is closed during washing to hold moisture
and sound inside and then opens for drying.
On models with POWER DRY, a fan circulates air
inside the dishwasher to speed drying.
The drying option may be changed at any time
during the cycle and affects only the drying period.
Time
Washes/
(approx.)
Rinses
84 min.*
2
washes
4 rinses
84 min.*
2
washes
4 rinses
78 min.*
2
washes
3 rinses
71 min.*
1 wash
3 rinses
12 min.
1 rinse

Advertisement

Table of Contents
loading

This manual is also suitable for:

690 series

Table of Contents