Toshiba D-R4SU Owner's Manual page 45

Remaining volume
1) Press EASY NAVI.
EASY NAVI Main Menu appears.
2) Press /
then press SELECT/ENTER.
REC MENU appears.
3) Press QUICK MENU.
Quick Menu appears.
4) Press /
then press SELECT/ENTER.
Disc budget calculation menu appears.
5) Press /
press SELECT/ENTER or press ADJUST.
The recorder calculates on a bar graph how much
a specific program (identified by a check mark) will
occupy on the disc.
Pressing ADJUST button can display or remove the
check mark.
e.g.
REC
Disc budget calculation
MENU
CH
3 4/10 ( Sa )
10 4/13 (Tu)
42 4/16 ( Fr )
4 4/16 ( Fr )
Elapsed
DVD HDD
Selected entry
When the entry item is marked X, the
recording does not fit. Change the setting.
6) Correct the parameters of the timer program if
necessary.
(Skip to step 8), if you do not need this.)
You can change "Video".
Select an item you want to modify and press
SELECT/ENTER button. The item will be ready to
be altered. Press ADJUST button to modify. When
complete, press SELECT/ENTER button.
You can adjust to a lower mode to reduce the
quality of the recording, and thus provide more disc
capacity (space).
7) Press .
Program modification is registered.
8) Press EASY NAVI to exit the GUI.
Downloaded From Disc-Player.com Toshiba Manuals
/ / to select "Timer Recording",
to select "Disc budget calculation"
to select a timer program, then
4/3 (Su) 9:00 pm
Date Start End Media Video Audio
11 : 30 pm 11 50 pm – : EP 1.4
DVD
D/M1
:
9 : 30 pm 10 00 pm EP 1.4
– DVD
D/M1
:
10 : 30 am 11 30 am – LP 2.2
DVD D/M1
: :
8 30 pm 9 30 pm – SP 4.6
DVD D/M1
( ) Selected(current) Available
DVD
Available disc volume
Notes
• The nearest 8 programs are calculated at a time.
• While the recorder is preparing for or executing a
programmed recording, any program modification cannot
be registered. Only programs which will start after 5
minutes or later can be modified.
• Available disc volume is not displayed for a DVD-R/RW disc
on which DVD-Video finalize process was executed.
To stop a programmed recording
To finish,
Press on the front panel twice.
When you press it once, a message appears. While
the message is displayed, press
Turning the power off automatically after
completing a programmed recording
1) While executing a programmed recording, press
QUICK MENU.
Result
Quick Menu appears.
2) Press
press SELECT/ENTER.
Keeping the power on even after the
programmed recording finished
If the recorder turns itself on to execute a programmed
recording, it will turn itself off after finishing the
recording. You can restrict this and keep the recorder
powered on.
1) While executing a programmed recording, press
QUICK MENU.
2) Press
then press SELECT/ENTER.
button once again.
/ to select "Auto power off" then
/ to select "Continuous power on"
45