Table of Contents
Advertisement
To change the language, do the following:
1. Select the CONFIG hard key.
2. Touch the Vehicle screen button.
3. Select the globe screen button or choose the
desired language.
4. Your choice will be stored automatically.
If you become stuck in a language that you do not
understand, do the following:
1. Turn off the vehicle.
2. Open and close the door. Wait about 10 seconds.
3. Turn on the vehicle.
4. Press the map hard key.
5. Touch the globe symbol screen button from the
WARNING screen. See Getting Started on
page 1-4 for more information. This will take you
directly to the Language screen. Choose the desired
language.
Your choice will be stored automatically. All screens
will display text in the selected language.
Entering the Personalization Menu
To enter the personal settings mode, use one of the
following procedures:
1. Be sure the ignition is either on, in accessory mode,
or in RAP. The transmission must be in either
PARK (P), or the vehicle must be stopped.
2. Press any button on the appropriate keyless access
transmitter to identify yourself as Driver 1 or
Driver 2. The driver number is shown on the back
of the keyless access transmitter.
5-3
Advertisement
Chapters
Table of Contents
