PREPARATION
Before beginning assembly or operation, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble or operate the product. Contact customer service for replacement parts.
• Estimated Assembly Time: 20 minutes
• Tools Required for Assembly (not included): Phillips screwdriver, Pliers
ASSEMBLY INSTRUCTIONS
1. Measure the proper position where the spit rod (B)
should be placed. Make sure it won't interfere with
the grill hood or any part of grill. Then decide which
holes of motor bracket (X-Y-Z) and
spit rod bracket (H) to attach to grill.
2. Use bolt (AA) to attach motor bracket (X-Y-Z) to the
outside of the grill's left side (or right, depending on
the grill). Place a washer (CC) on the end of each
bolt (AA) and secure assembly with nuts (BB).
Note: Do not overtighten. Attach spit rod bracket (G)
to the opposite side of the motor bracket (X-Y-Z)
using the same procedure.
Hardware Used
Bolt
AA
Nut
BB
Washer
CC
Fig. 1
Test it by closing the grill hood to check no parts
interfere with the grill hood.
X-Y-Z
A
Fig. 2
x 4
x 4
x 4
4
E
H
G
X-Y-Z
CC
AA
B
F
D
BB