Download Print this page

Kenwood KH-SR800 Instructions

Stereo headphones.
Hide thumbs
   

Advertisement

KENWOOD
STEREO HEADPHONES
CASQUE STEREO
AURICULARES ESTEREO
KH-SRSOO
INSTRUCTIONS
MANUEL D'INSTRUCTIONS
MANUAL DE INSTRUCCIONES
For Customer Use:
Enter the Model No. (on the cord stopper) below.
Retain this information for future reference.
Model No.
WARNING
Hearing Comfort and Well-Being
Do not play your personal audio at a high volume. Hearing experts advise against
continuous extended play.
·If you experience a ringing in your ears, reduce volume or discontinue use.
Traffic Safety
• Do not use while operating a motorized vehicle. It may create
a
traffic hazard
and is illegal in many areas.
• You
should
use
extreme
caution or temporarily discontinue use in potentially
hazardous
s~uations.
·Do not turn up the volume
so
high that you cannot hear
sound around you.
CAUTION
·The headphones have metallic parts which directly touch your
skin.
Do not use them
if
you have a metal allergy.
Metallic parts may be cold to the touch in lower temperatures.
·Stop using the
headphones~
they are causing great discomfort or irritation on the
skin
and the
ears.
They may damage your
skin
and cause
rash
or inflammation.
• If ear piece
or
other parts
of
headphones become lodged in
your
ear, be careful not
to push it deep into the ear
canal and seek skilled
medical assistance to remove
the piece. Damage to the
ear
may be caused by non-professionals attempting to
remove the piece.
·Store
the ear pieces in a
safe
place
where children
cannot reach them to avoid the
risk of a possible a((ident or hazard
such
as swallowing them.
·
In
dryer air conditions such as in winter, you may feel some static shock when using
the headphones.
• When in use
you
may
sometimes
hear friction noise, this is caused by the cord
rubbing against your clothing while walking or during
exercise.
Using the headphones
1 Be
sure
to use correct ear piece for left
and
right ear.
2 The medium-size
silicone
ear pieces are attached
when
purchased. You may not enjoy the bass sound fully if
the ear pieces do not fit your
ears.
To enjoy better
sound
while reducing
sound
leakage, choose the other pair of
ear pieces (three sizes of silicone ear pieces) and adjust
their positions to fit them to your ears.
3 When wearing the headphones, adjust the position of
the supports
so
that
they
fit your
ears.
Support
KENWOOD
©
2015 JVC KENWOOD Corporation
Printed in China
BSA-0846-00
U~oteco~
Press this
part
to perform the
Microphone
~
~
audio/phone operation
r::=::l
(See below)
Audio/phone operation (example for iPhone)
For audio operation
To
p@y
Ql
wa
tradt
To skip to the next track
To
.
to the
us
track
For phone operation
Toanswerorend-acall
, '"'
·
For some mobile phones, you may not be able to use some or all functions
depending on the
specifications
of the mobile phone
itself.
About the ear pieces
Two types of ear piece are provided: standard
type ear pieces, and open type ear piece that
make it easier to hear external sounds. Use
the most suitable ear pieces for your listening
Standard type Open type
environment.
ear pieces
ear pieces
CAUTION
·Although
the open type ear pieces are
designed so
that external
sounds
can be
heard
well,
make
sure
that you pay suffident attention to your surroundings while
using
them.
For replacing the ear pieces ...
·Attach
the
ear
pieces firmly when replacing them; failure to do
so
may result in
the ear pieces getting lodged in your earcanal when
removed,
thus becoming a
possible health hazard.
Notes on using ear pieces
·The
ear pieces deteriorate with age even in normal use and
maintenance.
·When the
ear
pieces get
dirty,
detach the ear pieces and wash them in
water-
diluted detergent. After
washing,
dry the ear pieces
and
attach to the headphones.
·When using the open type ear pieces, bass
sounds
will be weaker than when using
the
standard
type.
How to use the cord clip
1 Press the knob and attach the cord clip to
the
cord.
2 Attach the cord clip to a piece of your
clothing.
CAUTION
·Store
the cord clip in a place where children cannot reach to avoid the risk ofthe
a((ident such as swallowing it.
·When
you use the cord clip, be
careful
not to catch your fingers.
Cleaning the headphones
The headphone port
.
1
If the headphones themselves have become dirty, wipe them with a damp
cloth.
2 If they are very dirty, rinse them in
slow
running water.
Make sure that the water hits the
Not to be immersed or come into
headphones in this
direction.
continuous contact with water.
f
~
3 After rinsing the headphones, wipe them softly with a dry cloth. Only use
them when they are fully dry.
4 The headphones have waterproofing equivalent to
~
IPXS.
However,
they are not completely waterproof.
Lightly shake and tap the headphones agamst a
l
dry cloth as shown m the 1llustrat10n on the nghtto
~
ensure that no water drops remam. Otherwise, water
may enter the mner workmgs of the headphones
The support port
1 Remove the support part from the headphone
2 Wash the support part with water-diluted detergent by hand.
3 After washing, dry off and reattach the support part.
Attach the support part to the
Make sure that the
UR
marks on
headphone so it covers the ridge.
the headphones and support parts
match.
~*~'~~~.
Ridge
There is a small gap.
CAUTION
• Rinse
with
fresh water. Do not dean with
soap,
detergent, alcohol, or other
chemicals.
·Do not rub with a brush or
similar.
• Do not dry with a hairdryer or similar.
• Do not wipe it with thinner or benzine.
The remote and cord
Wipe the remote and/or cord with a damp cloth if they become
dirty.
Do not
wash with water.

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: