Use - Eureka 1400 series Owner's Manual

HOW TO USE
HOW TO USE
The upright vacuum cleaner is designed to be used on multiple types of carpeting. Do
The upright vacuum cleaner is designed to be used on multiple types of carpeting. Do not
not attempt to use the upright vacuum cleaner on bare floors, as damage to the
attempt to use the upright vacuum cleaner on bare floors, as damage to the floor covering
floor covering may result. Above the floor cleaning tools are available (optional).
may result. Above the floor cleaning tools are available (optional).
Handle Adjustment
Handle Adjustment
With the tip of the foot, press down to
With the tip of the foot, press down to
release the handle lock located at the left
release the handle lock located at the left
rear side of the cleaner. Move the handle
rear side of the cleaner. Move the handle
and adjust it to the desired position for (1)
and adjust it to the desired position for (1)
storing upright, (2) operating the cleaner at
storing upright, (2) operating the cleaner at
a comfortable height for the user, and (3)
a comfortable height for the user, and (3)
cleaning underneath low furniture.
cleaning underneath low furniture.
Power Switch
The power switch is mounted on the motor
Power Switch
hood. A push with the foot turns the motor
The power switch is mounted on the motor
ON; push again to turn the motor OFF.
hood. A push with the foot turns the motor
ON; push again to turn the motor OFF.
Cord Storage
The cleaner has two convenient cord storage
hooks attached to the handle. However,
Cord Storage
some models feature a quick release cord
The cleaner has two convenient cord
hook on the upper handle. A downward twist
storage hooks attached to the handle.
of the cord hook frees the cord for quick
However, some models feature a quick
removal. With either style, wind the cord
release cord hook on the upper handle. A
around the hooks for storage. Fasten the
downward twist of the cord hook frees the
plug to the cord to prevent unwinding.
cord for quick removal. With either style,
wind the cord around the hooks for storage.
Fasten the plug to the cord to prevent
unwinding.
Cleaner Height Setting
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of body
away from any moving part (such as the revolving brush). Turn off the
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts
switch and unplug the cleaner before changing the cleaner height setting.
of body away from any moving part (such as the revolving brush).
Turn off the switch and unplug the cleaner before changing the
The front of the cleaner has an adjustment that raises or lowers the cleaner base to match
cleaner height setting.
the type of carpet. With the cleaner cord unplugged, set the adjustment to lowest setting
The front of the cleaner has an adjustment that
for maximum cleaning. If the cleaner is difficult to push, move adjustment to next highest
raises or lowers the cleaner base to match the
setting until cleaner is comfortable to push. The brush roll must reach the carpet for effective
type of carpet. With the cleaner cord unplugged,
cleaning.
set the adjustment to lowest setting for maximum
cleaning. If the cleaner is difficult to push, move
Make each adjustment with cleaner switch off and cord disconnected from outlet. For
adjustment to next highest setting until cleaner
ease in moving the adjustment knob, place handle in operating position and tilt cleaner back
is comfortable to push. The brush roll must reach
to remove weight from front wheels.
the carpet for effective cleaning.
1. Store
Handle Lock
ON/OFF
Make each adjustment with
cleaner switch off and cord
disconnected from outlet. For
ease in moving the adjustment
knob, place handle in operating
position and tilt cleaner back to
remove weight from front wheels.

2. Use

3.Clean
Underneath
7
7