Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Snapper IMAGE 204094
- Page 1 Wireless TV Speaker Item No. 204094 OPERATING GUIDE...
-
Page 2: Important Safety Instructions
Thank you for purchasing the Sharper Image Wireless TV Speaker. Please read this operating guide carefully before use and keep it for future reference. If you have any questions, please feel free to contact our Customer Service department at 1 (877) 210-3449. IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully before using the Wireless TV Speaker. -
Page 3: Package Contents
PACKAGE CONTENTS FEATURES IDENTIFICATION On/off & volume control Receiver 1 AC Adapter Low battery/ charging indicator 1 Wireless Receiver (Speaker) Power indicator Pairing button 1 Transmitter Base 1 Audio Cord (for additional Base AC adapter jack Audio Receivers) (back) input port Tone control Wireless TV Speaker Item No. -
Page 4: Connection And Setup
CONNECTION AND SET UP Headphone Jack You may also connect the Wireless TV Headphones Select an Audio Connection via your TV’s headphone jack. Use the provided audio Locate the audio out connector on the back cable and connect the base of the Wireless TV Speaker of your TV or the headphone jack. - Page 5 For TVs with Audio-Out Ports (RCA type) Audio Connection Expansion (for Analog Outputs) If your TV has audio output RCA type ports on the If your TV or satellite/cable box analog output ports back of your TV, it is an analog output. Use the provided have been used with other audio devices, the Wireless audio cable and connect the base of the Wireless TV TV Speaker can be connected to your TV or satellite/...
- Page 6 Placement of Transmitter Base Battery Charging For best results, place the Transmitter Base on top of Place the receiver on the base (as shown) for charging your TV stand, or on top of your TV, as shown below. for 6+ hours before first use. During charging, the Low Battery/Charge indicator blinks.
-
Page 7: Operation
OPERATION Volume On/Off, Volume and Tone Control 1. Rotate the knob to turn receiver On or Off and to Tone Adjustment adjust its volume. 2. You can turn your TV speaker to Low or to Off. On some TVs, you may need to use your remote to go into the TV’s Menu to achieve an optimal audio/speaker setting. - Page 8 Pairing Additional Receivers (continued) 1. Turn the new receiver ON. 2. Press and hold (about 5 seconds) the PAIRING button on the bottom of the receiver until the ON/ Bottom OFF indicator starts blinking. Pairing period is of receiver approximately 20 seconds. (Speaker) 3.
-
Page 9: Troubleshooting
TROUBLESHOOTING CLEANING AND MAINTENANCE • No sound from the receiver Unplug the AC Adapter from the wall. Then, use a dry, Check all connections to ensure that all the cords soft cloth to clean and dust the outside surfaces and are firmly connected at the back of the base and TV. -
Page 10: Warranty Information
WARRANTY INFORMATION Incidental or Consequential Damages Your Wireless TV Speaker comes with a one year Sharper Image is not responsible for any incidental or limited warranty. We warrant during this warranty consequential damages, including, without limitation, period from the date of purchase to the original commercial loss of profit or for any incidental consumer that the Wireless TV Speaker will be free expenses, loss of time or inconvenience. - Page 11 FCC INFORMATION (FOR U.S. CUSTOMERS ONLY) off and on, you may try one the following methods to Part 15 of FCC Rules Information correct the interference: This device complies with Part 15 of the FCC rules. 1. Where it can be done safely, re-orient the receiving Operation is subject to the following two conditions: (1) television or radio antenna.
Need help?
Do you have a question about the IMAGE 204094 and is the answer not in the manual?
Questions and answers