Safety - Oreck HEATWISE BR1000 User Manual

E N
IMPORTANT INSTRUCTIONS!
• Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or relocatable power tap (outlet/power strip).
• Do not place the heater near a bed because objects such as pillows or
blankets can fall off the bed and be ignited by the heater.
SAVE THESE INSTRUCTIONS
NO USER-SERVICEABLE PARTS INSIDE
Extensive testing has verified the safety of the technology used in SR1500,
SF1500 and the BR1000 zone heaters. Safe, clean Infrared Quartz Heating
Elements provide the heat; there is no combustion or fumes.
This heater is for use on 120 volts. The cord has a plug as shown in Figure A
below. An adapter as shown in Figure B is available for connecting three-blade
grounding-type plugs to two-slot receptacles. The green grounding plug
extending from the adapter must be connected to a permanent ground such as
a properly grounded outlet box. The adapter should not be used if a three-slot
grounded receptacle is available.
GROUNDING
PIN
Sketch A
G L I S H
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Grounding Method
GROUNDED
OUTLET BOX
GROUNDED
OUTLET
4
ADAPTER
METAL
SCREW
Sketch B