Safety - Rules For The Position Adjustment Of The Decurling Bar - GBC ORBIT 2000 Operating & Maintenance Manual

Orbit™ 2000 Operation and Maintenance Manual
1.9 Safety - Rules for the position adjustment of the decurling
bar
During lamination internal stress develops between paper and the chrome roller. The decurling
bar straightens the sheets before they exit the lamination section. During adjustment of the bar, the
following safety rules must be observed:
CAUTION: Exercise caution while loosening the decurling bar handle.
1/
The securing screw and the edge of the groove on the regulating
CAUTION: Exercise caution while adjusting the control lever position.
2/
During sudden change in the position of the control lever, the set-up
3/
CAUTION: Do not place your fingers near the groove on the regulating
4/
C A U T IO N : D ue to heat em inating from the chrom e roller and pressure
© GBC Films Group January 2001
wheel may collide during sudden loosening.
lever of the decurling bar may be hit.
wheel while changing the position of the decurling bar.
roller area, avoid contact w ith the decurling bar.
WARNING
WARNING
WARNING
W AR N IN G
Safety
Page 1 - 19