Advertisement
•
Red – critical messages including alarm
•
Yellow – zones bypassed
•
Blue – system (fault) conditions present
•
Green – system is normal
Arm Your System In Away Mode
Enter a valid PIN code to unlock the screen.
Touch the Away or Away + button to arm your system in Away
mode:
The icon will change to red when the alarm system is set in
away mode.
A buzzer will sound (beeping) announcing the exit delay.
Leave the premises during this time.
If your system has multi-partition control enabled, the Away +
button will be displayed.
Also a number will appear above the icon indicating the
number of partitions are in the state that the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which partitions and at
what time/day that user has access to.
Arm Your System In Stay Mode
Enter a valid PIN code to unlock the screen.
Touch the Stay or Stay + button to arm your system in Away
mode:
The icon will change to yellow when alarm system is set in stay
mode.
In Stay mode, typically one or more zones will be bypassed.
See colour code section on top of the display to read the zones
that are bypassed or go to Status menu.
2 / 7
If your system has multi-partition control enabled, the Stay +
button will be displayed.
Also a number will appear above the icon indicating the
number of partitions are in the state that the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which partitions and at
what time/day that user has access to.
Disarm One Or More Partitions
Enter a valid PIN code to unlock the screen.
Typically the buzzer will sound (continuous tone) announcing
the entry delay.
Touch the Off or Off + button to disarm your system:
If your system has multi-partition control enabled, the Off +
button will be displayed.
Also a number will appear above the icon indicating the
number of partitions that are in the state the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which areas and at what
time/day that user has access.
Disarm After An Alarm
When an alarm condition occurs the screen may make a
constant beeping sound.
Enter a valid PIN code to unlock the screen.
The colour coded section provides further information about
the alarm condition, including the zone description (if
applicable).
For more details, touch the Status button. The partition and
zone(s) that caused the alarm will be displayed. Touch the
partition or zone number on the screen for a description.
P/N 230444 • REV D • ISS 08DEC15
Advertisement
