Nevir NVR-2555DUC User Manual page 25

Dvb-tsolution
Table of Contents

Advertisement

Available languages

Available languages

SAFETY INFORMATION
MAINS SUPPLY
OVERLOADING
LIQUIDS
CLEANING:
VENTILATION:
ATTACHMENTS:
CONNECTION TO
THE CABLE TV
SIGNAL AND TV:
SERVICING
LIGHTNING
GROUNDING
Note :
Dispose the used batteries at designated place for environment protection
~220V-240V 50/60Hz
Do not overload wall outlets, extension cords or adapters
as this can result in fire or electrical shock.
Keep liquids away from the STB.
Before cleaning, disconnect the STB from the wall socket.
Use a cloth lightly dampened with water(no solvents) to
clean the exterior.
Do not block the STB ventilation holes. Ensure that free airflow
is maintained around the STB. Never store the STB where
it is
exposed to direct sunlight or near heating euipment e.g. a
radiator.
Never stack other electronic equipment on top of the STB.
Place the STB at least 30mm from the wall.
Do not use any attachment that is not recommended by the
manufacturer; it may cause a hazard or damage the equipment.
Connect all components before plugging any power cords into the wall
outlet. Always turn off the STB, TV and other components before you
connect or disconnect any cables.
Do not attempt to service this product yourself.
Any attempt to do so will make the warranty invalid.
Refer all servicing to a qualified service agent.
If the STB is installed in an area subject to intense lightning
activity, protection devices for the STB mains connector are
essential.
The individual manufacturer's instruction for safeguarding other
equipment, such as TV set, Hi-Fi, etc., connected to the STB must
also be followed during lightning storms.
The grounding system must comply with SABS 061.
2

Advertisement

Chapters

Table of Contents
loading

Table of Contents