Table of Contents
Advertisement
XLS DriveCore
Product Registration: Register your new product at http://warranty.harmanpro.com.
Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local HARMAN Professional
Distributor. If you need assistance locating your local distributor, please visit www.crownaudio.com/where_to_buy.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during
installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest
version of this manual, please visit the Crown website at www.crownaudio.com.
Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the property of their respective owners.
Later versions of this manual and additional information about this product may be available at the Crown website at www.crownaudio.com.
Warranty & Product Registration: Register your new Crown amplifier at http://warranty.harmanpro.com
Some models may be exported under the name Amcron
©2015 by HARMAN International, Inc., 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000.
Operation Manual
®
2 Series
TM
XLS 1002
XLS 1502
XLS 2002
XLS 2502
5055568 - 04/15
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crown DriveCore XLS 1002
Summary of Contents for Crown DriveCore XLS 1002
-
Page 1: Operation Manual
Crown website at www.crownaudio.com. Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the property of their respective owners. Later versions of this manual and additional information about this product may be available at the Crown website at www.crownaudio.com. -
Page 2: Important Safety Instructions
XLS DriveCore 2 Series Power Amplifiers Important Safety Instructions 1. Read these instructions. WATCH FOR THESE SYMBOLS: 2. Keep these instructions. The lightning bolt triangle is used to alert the user to the risk of electric shock. 3. Heed all warnings. The exclamation point triangle is used to alert the user to important 4. -
Page 3: Declaration Of Conformity
XLS DriveCore 2 Series Power Amplifiers DECLARATION OF CONFORMITY Issued By: HARMAN International Inc. FOR COMPLIANCE QUESTIONS ONLY: Sue.Whitfield@harman.com 1718 W. Mishawaka Rd. Elkhart, IN 46517 U.S.A. European Representative’s Name and Address: HARMAN International Cranborne Road Potters Bar, EN6 3JN United Kindgom Equipment Type: Power amplifiers Family Name: XLS DriveCore 2 Series Model Names: XLS 1002, XLS 1502, XLS 2002, XLS 2502... -
Page 4: Table Of Contents
XLS DriveCore 2 Series Power Amplifiers Table of Contents Important Safety Instructions ....................... 2 Declaration of Conformity ........................3 Table of Contents ..........................4 Welcome ............................5 Front Panel Features ......................... 6 Back Panel Features ......................... 6 Get Started (Amplifier Modes) ......................7 Stereo Mode Bridge Mode Input-Y Mode... -
Page 5: Welcome
Welcome Crown XLS DriveCore 2 Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability that effortlessly deliver night after night. We packed XLS with enormous flexibility, thanks to a wide range of features ranging from Peak Limiters to DSP functionality that allows Band Pass filters on each channel. -
Page 6: Front Panel Features
XLS DriveCore 2 Series Power Amplifiers Front Panel Features Indicators: Signal Presence Indicator: Two green LED’s, one for each channel, illuminate when the channel input signal exceeds -40dBu. -20 Indicator: Green LED flashes when output signal level exceeds -20dB below clip. Blue LEDs: -10 Indicator: Green LED flashes when output signal level exceeds -10dB below clip. -
Page 7: Get Started (Amplifier Modes)
XLS DriveCore 2 Series Power Amplifiers Get Started High Pass Mode Stereo Mode This is the default mode the amplifier is set to from the factory. Filters are available in this mode and will be described in detail in the Crossover Filters section on page 9. -
Page 8: Input-Y Mode
XLS DriveCore 2 Series Power Amplifiers Crossover Mode Get Started Input-Y Mode The INPUT-Y mode directs the input signal form Channel 1 to both amplifier output channels. This mode is often configured to use a Low Pass filter on Channel 1 and a High Pass filter on Channel 2 as a crossover to drive bi- amplified systems. -
Page 9: System Configuration Examples
XLS DriveCore 2 Series Power Amplifiers Crossover Mode System Configuration Examples Monaural Bi-Amp System 1. Configure the system as described in Input-Y section on page 8. The woofer connected to Channel 1 and the mid/high drivers to Channel 2. 2. Set up Channel 1 as a Low Pass filter and use your crossover frequency as the filter's cutoff frequency. -
Page 10: Menu Navigation
XLS DriveCore 2 Series Power Amplifiers Menu Navigation Main Menu Enter the MAIN MENU by holding the MENU/SEL button beneath the display for about a second. From the MAIN MENU one may navigate, using the PREVIOUS and NEXT buttons, to one of four other menus or select EXIT to return to the status screen where only three lines of text are displayed. Use the up arrow or down arrow to highlight the menu you wish to go to and press the MENU/SEL button to make your selection. -
Page 11: Additional Features
XLS DriveCore 2 Series Power Amplifiers Additional Features System Menu The following features may be accessed through the SYSTEM MENU. The SYSTEM MENU is the fourth selection on the MAIN MENU. Since only three selections are displayed, you must scroll down using the NEXT button until SYSTEM is displayed and highlighted. SYSTEM MENU DISPLAY SLEEP LIGHTING... -
Page 12: Specifications
XLS DriveCore 2 Series Power Amplifiers Specifications Performance Specifications 1002 1502 2002 2502 Sensitivity .775Vrms or 1.4Vrms .775Vrms or 1.4Vrms .775Vrms or 1.4Vrms .775Vrms or 1.4Vrms Frequency Response +0dB, -1dB +0dB, -1dB +0dB, -1dB +0dB, -1dB (1W, 20Hz - 20kHz) Signal to Noise Ratio (rated dBr to full rated 8Ω... -
Page 13: Service
Complete the Service Return Authorization form in the back of this manual, when returning a Crown product to the factory or authorized service center. The form must be included with your product inside the box or in a packing slip envelope securely attached to the outside of the shipping carton. - Page 14 We will not be responsible for these items. 3. When shipping your Crown product, it is important that it has adequate protection. We recommend you use the original pack material when returning the product for repair. If you do not have the original box, please call HARMAN at 800.342.6939 or 574.294.8210 and order new pack material.
-
Page 15: Warranty
ITEMS EXCLUDED FROM THIS CROWN WARRANTY This Crown Warranty is in effect only for failure of a new Crown product which occurred within the Warranty Period. It does not cover any product which has been damaged because of any intentional misuse, accident, negligence, or loss which is covered under any of your insurance contracts. -
Page 16: Service Return Authorization Request
Shipping Address: HARMAN Factory Service, 1718 W. Mishawaka Rd., Elkhart, IN 46517 You may also request a service return authorization at www.crownaudio.com/support/rma PLEASE PRINT CLEARLY SRA #: ______________________ (If sending product to Crown factory service) Model: ______________________ Serial Number: _________________________ Purchase Date: ____________________ PRODUCT RETURN INFORMATION... - Page 17 XLS DriveCore 2 Series Power Amplifiers Operation Manual page 17...
- Page 18 XLS DriveCore 2 Series Power Amplifiers Operation Manual page 18...
- Page 19 XLS DriveCore 2 Series Power Amplifiers Operation Manual page 19...
Need help?
Do you have a question about the DriveCore XLS 1002 and is the answer not in the manual?
Questions and answers