Note
•
If your preferred language is not available for disc
language, audio or subtitle, you can select [Others]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
•
If you select a language which is not available on a disc,
this player uses the default language of the disc.
Advanced options (clear
memory...)
1
Press .
2
Select [Setup] > [Advanced] to access the
advanced setup options.
[BD-Live security]: Restrict or allow access
•
to BD-Live (only for non-commercial, user-
created BD-Live discs).
[Downmix mode]: Control 2-channel
•
stereo audio output.
[Software update]: Select to update
•
software from a network or from USB
storage device.
[Clear memory]: Delete the previous BD-
•
Live download on the USB storage device.
A "BUDA" folder is automatically created
to store the BD-Live download.
[DivX
VOD Code]: Display the DivX
•
®
registration code or the deregistration
code for this player.
•
[Netflix ESN]: Display ESN (Electronic
Serial Number) for this player.
[Deactivation]: Cancel Netflix or Vudu
•
activation on this player.
[Version information]: Display the
•
software version of this player.
[Restore default settings]: Reset this player
•
to the default settings made at the factory,
except for password and parental control
level.
Note
•
You cannot restrict Internet access on commercial
Blu-ray discs.
•
Before you purchase DivX videos and play them on this
player, register this player on www.divx.com with the
DivX VOD code.
4 Update software
Before you update the software of this player,
check the current software version:
Press , and then select [Setup] >
•
[Advanced] > [Version information], and
press OK.
Update software via the
Internet
1
Connect the player to the Internet (see
"Set up a network").
2
Press , and select [Setup].
3
Select [Advanced] > [Software update]>
[Network].
» If an upgrade media is detected, you
4
Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
®
Update software via USB
1
Check the latest software version on
www.philips.com/support.
•
2
Download the software into a USB storage
device.
a Unzip the download, and make sure
b Put the "UPG" folder in the root
are prompted to start the update.
player automatically turns off and on
again.
Search for your model and click on
"Software and drivers".
that the unzipped folder is named
"UPG".
directory.
EN
21