Setting The Alarm; Using The Snooze Alarm; Setting The Sleep Timer - NexxTech 8015483A Instruction Manual

Setting the alarm

1. Press and hold the OFF/FM/AM button to switch to OFF mode, which is the clock mode, the
display will show the time.
2. Repeatedly press AL1/VOL- or AL2/VOL+ button to select the desired alarm mode. There are
two alarm modes: Buzzer or radio. When the alarm is activated, the corresponding alarm
indicator light will turn on. Press and hold the AL1/VOL- button to enter into the AL1 mode.
Press the "HOUR/UP" button to adjust to your desired hour, press the "MIN/DOWN" button to
adjust to your desired minute.
3. Press and hold the AL2/VOL+ button to enter into the AL2 mode, the operation is same as the AL1.
Note: When the alarm is set to radio mode, the last used volume level and station will be used.

Using the snooze alarm

1. When the alarm (buzzer or radio) turns on, press the Snooze button. The alarm turns off for
about nine minutes.
2. To cancel the snooze feature, press and hold the OFF/FM/AM button to switch to OFF mode,
which is the clock mode.

Setting the sleep timer

The Sleep function is designed to automatically turn off the radio.
1. Press the SNOOZE/SLEEP button, the display will show 90 minutes. The radio will be turned
off after the set sleep time has elapsed.
2. To select the desired sleep time from 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes, press the
SNOOZE/SLEEP button until the desired number of minutes appears.
3. To turn off the sleep timer before the set time occurs, press the SNOOZE/SLEEP button once.
9