Hitachi CP-TW2502 User Manual page 43

3.1 Projector Web Control - Network Settings (continued)
Item
Wireless Setup
Simple Access Point
settings
IP Address
Subnet Mask
SSID
SSID Broadcast
Encryption
WPA Passphrase
Ch
(continued on next page)
Input SSID.
The maximum number of input characters is 32.
Only alphabets, numbers and the following symbols can be
used.
Default setting of SSID in Simple Access Point mode is
[SimpleAccessPoint].
Set this function to OFF when making SSID of a projector not
to be displayed in wireless connection list of the computer.
Select data encryption method.
Input WPA Passphrase.
alphabets, numbers and the following symbols can be used.
Select from "1" to "11", a channel to use in the Simple Access
Point mode.
NOTE
country. In addition, depending on the country or region,
it may be required to use a wireless network card that
region.
Description
3. Web Control
43