Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Olympia muria
Summary of Contents for Olympia muria
- Page 1 MANUAL OLYMPIA MURIA...
-
Page 2: Technical Description
Service instructions Introduction Technical description Installation instructions Safety regulations First firing Accessories Maintenance and repair Heating capability Service and installation organizations Package and scrapped product disposal Installing the hot water distribution (only for the stove with a hot water exchanger) 1. -
Page 3: Installation Instructions
resistant glass. The glass not only increases the aesthetic impression of the view of the flames, but also enables the transfer of heat for longer distance by heat emission. This creates unique thermal comfort even if you are sitting several meters away from the stove. The glass also prevents sparks from falling from the burning wood and smoke from escaping to the room. - Page 4 chimney entrance must be provided with a shrunk ring and a rosette. The blind cover can be replaced with the smoke flue duct orifice depending on the flue duct being connected to the back or the upper flue gas outlet. Tightness and firmness of connections is very important. The Type 1 stove (see the technical data table) is equipped with a self-closing door.
-
Page 5: Safety Regulations
The insert must be installed so that it can always be removed from the surrounding structure if necessary. During appliance installation, all local regulations, including regulations related to national and European standards, must be complied with. A professional project should be elaborated prior to installation. -
Page 6: First Firing
Objects made of combustible materials mst not be placed onto the appliance or in a distance smaller than the safety distance from the appliance. 4.2 Measures in the event of fire in the chimney During normal operation, especially if damp fuel is used, soot and tar build up in the chimney. If the chimney is not regularly checked and cleaned, danger of fire in the chimney will increase. -
Page 7: Maintenance And Repair
fuel or big draught and air inlet may result in stove overheating and damage. Little draught (less than 9Pa) will cause blackening of the glasses and smoke may escape to the room when the stove door is open. Note:Divided rated heat output, e.g. Pj= 6+4 means - 6 kW will move to the heated room due to heat exchange processes, 4 kW will be absorbed by the hot water exchanger. - Page 8 Stove storage and operation must be ensured in a dry area, as the fireproof colour is not moisture resistant. Stove cleaning (except the glass) is performed without the use of water cleaning agents, e.g. by vacuuming or brushing. Any modifications of the appliance are inadmissible.
- Page 9 When installing the hot water distribution, relevant regulations resulting from the following standards must be complied with: ČSN 06 0320 – Service water heating, designing and planning. ČSN 06 0830 – Security and surveillance systems for central heating and service water heating. We recommend you to contact a specialist heating firm at your place of residence to make the installation.
Need help?
Do you have a question about the muria and is the answer not in the manual?
Questions and answers