BenQ V2210 User Manual page 8

2. Connect the PC video cable
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without
the ferrite filter) to the monitor video socket. Connect the
other end of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to one of the two
HDMI ports on the monitor.
Connect the other end of the cable to the HDMI port of a
digital output device.
The video cable included in your package and the socket
illustrations on the right may vary depending on the LCD
model.
3. Connect the headphone.
You may connect headphones to the headphone jack
found on the left side of the monitor. See picture on the
right.
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
'POWER IN' on the rear of the monitor. Do not connect
the other end to a power outlet just yet.
5. Route the cables via the cable clip.
8 How to assemble your monitor hardware
Downloaded from ManualMonitor.com Manuals