Pioneer DDJ-WeGO2 Operation Manual page 7

12. SYNC: Syncs the deck with the Master Deck (will match BPM value and Beatgrid if
tracks are playing).
Hold SHIFT down and then press this button to manually set a deck as Master
Deck (all other decks will sync to the Master Deck), or allow VirtualDJ to
automatically select the Master Deck, depending on the Output status of each deck
(which deck is playing to the Master Out)
13. PITCH: Adjusts the tempo of the track. A different pitch range can be selected from
the VirtualDJ GUI.
14. AUTOLOOP. Use this encoder to half (anti-clockwise) or double (clock-wise) the
size of the Loop. Push the encoder to trigger the selected Loop.
Hold SHIFT down and then use this encoder to fine move the Beatgrid of the track
forward or backwards (in case it is incorrectly calculated by VirtualDJ).
Hold SHIFT down and then push this encoder to set a Loop In (Entry) point. Push
again to set the Loop Out (Exit) point and trigger a manual loop. Push for a 3
to exit the loop.
15. CTRLA. Press this button and then use the Jog to adjust the Key of the track. Press
the same button again to stop the Key control and reset the Key of the track to its
original value.
While the Key control is enabled, the illumination of the Jog will offer cold/warm
speeding colors, depending on the value of the applied key value.
16. FX1: Press this button to activate the selected effect of slot 1. Hold SHIFT and then
press this button to select the next available Effect from the list for Effect slot 1.
If the Effect is enabled, use the Jog to control the 1
Effect.
Hold SHIFT down and then use the Jog to control the 2
Effect.
While the Effect is active, the illumination of the Jog will change to red and the speed
of the rotation will depend on the Effect parameter value.
17. FX2: Press this button to activate the selected effect of slot 2. Hold SHIFT and then
press this button to select the next available Effect from the list for Effect slot 2
If the Effect is enabled, use the Jog to control the 1
Effect.
Hold SHIFT down and then use the Jog to control the 2
Effect.
While the Effect is active, the illumination of the Jog will change to green and the
speed of the rotation will depend on the Effect parameter value.
18. FX3: Press this button to activate the selected effect of slot 3. Hold SHIFT and then
press this button to select the next available Effect from the list for Effect slot 3
If the Effect is enabled, use the Jog to control the 1
Effect.
Hold SHIFT down and then use the Jog to control the 2
Effect.
While the Effect is active, the illumination of the Jog will change to blue and the
speed of the rotation will depend on the Effect parameter value.
VirtualDJ 8 – Pioneer DDJ-WeGO2
st
parameter of the selected
nd
parameter of the selected
st
parameter of the selected
nd
parameter of the selected
st
parameter of the selected
nd
parameter of the selected
rd
time
7