Summary of Contents for TLC CKC8105
- Page 1 WIRELESS WEATHER STATION WIRELESS WEATHER STATION C-8105/C-8145 Please Note USER’S INSTRUCTIONS We are unable to supply Additional Sensors for This Weather Station P17810500050...
- Page 2 The multifunctional weather station is equipped with many Weight functions providing thorough weather information to you. Main unit: 298gm The receiver unit has a clear, easy-to-read display that Remote sensor: 53gm shows weather forecast, indoor temperature, relative Dimension humidity, pressure, moon phase, time and date, as well as Main unit: 115(W)x220(H)x 90(D)mm the temperature and relative humidity measured and...
-
Page 3: Remote Sensor
REMOTE SENSOR MAIN FEATURES: WEATHTER STATION: -20 ºC to +60 ºC Temperature measuring range: -20 ºC to +55 ºC Recommended operating range: 0.1 ºC / 1ºF (above 0 ºC) Temperature resolution: 1 ºC / ºF (below 0 ºC) Remote relative humidity measuring range: 20% RH to 90% RH Recommended operating range: 20% RH to 90% RH Resolution:... -
Page 4: Specifications
1. TIME: - Press it once to view the year. - Press and hold it for 2 seconds to enter the time setting mode. 2. ALARM: - Press it to switch to alarm and temperature alarm. - In alarm mode, press and hold it for 2 seconds to enter the alarm and pre-alarm setting mode. - Page 5 - Press it to stop alarm when it is sounding. C-8145: 8. Table stand: - Use to stand on desktop. TEMP OUT TEMP 9. mb/hPa inHg: - Switch between mb/hPa or inHg. NOTE: 10. ºC / ºF: Attention should be drawn to the environment aspects of - Switch between ºC / ºF.
-
Page 6: Low Battery Indicator
or minimum recorded temperature and humidity. 15. ATMOSPHERIC PRESSURE CHART: - Shows the atmosphere pressure trend of the last 24 hours. (For C-8145, only temperature record is displayed). 16. ATMOSPHERE PRESSURE WINDOW: - Displays the current atmospheric pressure data and indicates the last 24 hours pressure history. - Page 7 0.24 0.18 0.12 0.06 0.06 0.12 0.18 0.24 InHg 1. LED indicator: - Flashes when the remote unit transmits a reading. 2. LCD: ABOUT THE MOON PHASE: - Displays the current temperature and humidity monitored by the remote unit alternatively. The unit has 8 different moon phases.
- Page 8 5. RESET: - Return all values to default value. 6. Battery compartment: - Accommodates 2 AAA size batteries. 7. Battery door 8. Wall mount holder: - Supports the transmitter in wall mounting. 9. Folding table stand BEFORE YOU BEGIN PAST 24 HOURS PRESSURE RECORDS TRANSMITTER: The current and historical barometric pressure is shown 1.
-
Page 9: Weather Station
2. The weather forecast is meant for next 12 to 24 hours. It 5. Select the temperature unit by sliding the ºC / ºF switch may not necessarily reflect the current situation. besides the battery compartment. 3. The “Sunny” icon, when applies to nighttime, implies clear 6. -
Page 10: Weather Forecast
2. T h e b u i l d i n g m a t e r i a l a n d t h e p o s i t i o n o f t h e receiver and transmitter affect the effective range. So try various locations will help to obtain the best result. -
Page 11: Weather Trend
MAX. Temperature / humidity record Slightly cloudy Cloudy TENDENCY TENDENCY Rainy Storm Sunny MIN. Temperature / humidity record TENDENCY TENDENCY NOTE: 1. Do not set the weather indicator when it is raining. Raining will give unstable data. 2. Do not set the weather indicator in night time. WEATHER TREND RECEPTION OF RADIO CONTROLLED TIME SIGNAL The temperature-trend, humidity-trend and pressure-trend... -
Page 12: Signal Strength Indicator
When used for the first time (after inserting the batteries or If the readings go above or below the specified range, the pressing RESET), the clock starts receiving time signals receiver and transmitter will keep show the last record within and the reception display flashes. -
Page 13: Manual Time Setting
2. Press and hold the ALARM key for 2 seconds, pre-alarm time flashing, press UP or DOWN key to change its value. NOTE: SELECT THE TIME ZONE (FOR WWVB VERSION ONLY) To activate pre-alarm function, ALARM must be on. The default time Zone is PACIFIC Zone, if your location is out of Pacific, set the time zone as the following: In normal time mode, press button to change it:... -
Page 14: Alarm And Snooze Setting
5. After setting completed, press TIME key to exit setting NOTE: mode, or let it exit automatically in 30 seconds without pressing any key. 1. The alarm will automatically turn on when setting the alarm time. 2. The EL backlight will keep on for 5 seconds when the English Germany Spanish...
Need help?
Do you have a question about the CKC8105 and is the answer not in the manual?
Questions and answers