Cassette Deck/Vcr Features; Using The Md/Tape 1 And Tape 2 Monitor Buttons; Monitoring A Program Source; Dubbing A Cassette Tape - Optimus STAV-3790 Owner's Manual

31-3046.fm Page 24 Monday, January 29, 2001 12:43 PM

Cassette Deck/VCR Features

Using the MD/TAPE 1 and
TAPE 2 MONITOR Buttons
Monitoring a
Program Source

Dubbing a Cassette Tape

24
You can connect two cassette decks to the receiver. Selecting either
or lets you hear the playback from the cassette
TAPE 1 TAPE 2 MONITOR
deck you connected to the receiver's corresponding (
) jacks.
MONITOR
Press .
MD/TAPE1
MD/TAPE 1
back from the cassette deck or VCR you connected to the receiver's
jacks.
TAPE 1 IN
Press .
TAPE 2
TAPE 2 MONITOR
program source you selected. You can hear playback or monitor a
recording from the cassette deck you connected to the receiver's
jacks. The
MONITOR TAPE 2 MONITOR REC
from the previously selected source after you press
To return to the previous source, press
disappears.
Notes:
• If you press
TAPE 2 MONITOR
ing nor recording, the receiver mutes the current audio source. To
hear the audio source, press
from the display.
• Do not press
TAPE 2 MONITOR
connected to
TAPE 2 MONITOR REC
ing for about 1 second.
The receiver sends the audio of the program source you select—
, , , , or
DVD/LD TV/SAT VIDEO CD
jacks. If you select one of the audio/video source,
TAPE 2 MONITOR OUT/REC
the video program is also sent to the
The control does not affect the level of the signal going to the
VOLUME
tape decks.
You can copy (dub) a cassette tape from one cassette deck to another
through the STAV-3790.
You can use either deck as the playback or recording deck. However, if
you want to monitor the cassette deck during dubbing, use the deck
connected to the
MD/TAPE 1
nected to the jacks as the recording deck. Then press
TAPE 2 REC
so TAPE 2 and the last program source you selected appear on
MONITOR
the display. (See "Using the MD TAPE 1 and TAPE 2 MONITOR But-
tons".)
The control does not affect the level of the signal going to the
VOLUME
tape decks.
Note: The receiver passes through the original signals as they are.
Therefore, you cannot dub the digital signal to analog signal or vice
versa.
appears on the display. You hear the play-
appears on the display along with the last
jacks continue to output sound
TAPE 2 MONITOR
TAPE 2 MONITOR
when that cassette deck is neither play-
so TAPE 2
TAPE 2 MONITOR
while you are recording on the deck
. because it interrupts the record-
(tuner)—to the
FM/AM MD/TAPE 1 OUT/REC
VIDEO OUT TO MONITOR TV
jacks as the source, and the deck you con-
MD/
or
MD/TAPE 1 TAPE 2
MD/
TAPE 2
.
again so TAPE 2
disappears
,
VCR
and
jack.
TAPE 2