Using Windows® Xp - D-Link dap-1533 User Manual

Hide thumbs Also See for dap-1533:

Table of Contents

Section 5 - Connecting to a Wireless Network

Connect to a Wireless Network

Using Windows® XP

Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service

Pack 2 users. If you are using another company's utility or Windows® 2000, please refer to the user manual of your wireless

adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows

XP utility as seen below.

If you receive the Wireless.Networks.Detected bubble, click on the

center of the bubble to access the utility.

Right-click on the wireless computer icon in your system tray (lower-right

corner next to the time). Select View.Available.Wireless.Networks.

The utility will display any available wireless networks in your area.

Click on a network (displayed using the SSID) and click the Connect

button.

If you get a good signal, but cannot access the Internet, check you

TCP/IP settings for your wireless adapter. Refer to the Networking.

Basics section in this manual for more information.

D-Link DAP-1533 User Manual

Table of Contents