General Operations; Radio Operation - Telefunken TF-1624U Instruction Manual

Instruction manual
AC adaptor power
• Plug the supplied AC/DC power adaptor
into the power input on the back of the unit.
Connect the power cord to a household mains
outlet. Make sure the voltage is compatible.
• Always remember to disconnect the
power cord from the main supply before
disconnecting it from the unit.
• Disconnect the power cord from the mains
when not in use.

General operations

Clock and calendar
• In clock mode (no ALARM indication)
press and hold SET button to enable time
setting mode. Press repeatedly SET button
to go to setting of parameters in following
sequence: 12/24-hour => hour => minute =>
year => month => date => exit. The selected
parameter will blink meaning readiness for
adjustment. The default time setting is 01-01,
2014, THU, 12-hour, AM12:00.
• Press TUNE/
parameter down. Press
parameter up.
• Day of week will be set automatically.
• In time setting mode, if no button is pressed
within 10 seconds after a parameter is selected,
the unit will automatically go to clock mode.
• In time setting mode, press MODE button
to return to clock mode.
Thermometer
The unit is equipped with a built-in
thermometer. The current temperature is
updated every 30 seconds and is shown on the
display. In clock mode press SNOOZE button
to select Celsius or Fahrenheit thermometer
mode.
AUX input
To connect an external audio device (eg.
MP3-player), please use a standard stereo
cable with 3.5 mm to 3.5 mm plugs to connect
4
4
button to adjust the
/TUNE to adjust the
the audio line-out of the external device to the
AUX input socket of this unit.
Backlight
Hold the SET button for 2 seconds to
switch on the backlight, repeatedly press for 2
seconds to switch it off.

Radio operation

• In clock mode press FUNCTION button to
choose the radio mode.
• For FM reception extend the telescopic
antenna.
• To adjust the frequency step by step
press repeatedly TUNE/
For automatic search of a station, press and
hold TUNE/ / /TUNE buttons; the unit will
look for the next available station and start
its broadcast. Repeat the operation to search
more stations.
• To save a station, press MEM/REP button.
The memory position will blink. Press MEM-
UP/MEM-DN buttons to select a memory
position. Press MEM/REP button to save the
current station under the selected number. You
can store maximum 20 stations in the memory.
• Hold the MEM/REP button for 2 seconds,
it will scan and save all the available stations
automatically.
During program saving, if no button is
pressed within several seconds, the unit will
return to normal radio mode.
• To call a saved station, press MEM-UP/
MEM-DN buttons.
• To adjust volume, in radio mode press
repeatedly VOL+/VOL- buttons.
• To switch off the radio, press POWER
button for 2 seconds.
USB/SD/MMC operation
Connecting USB/SD/MMC
• Insert a USB device into the USB port or
/ /TUNE buttons.