Advertisement
Congratulations on your purchase of our SUNJOY Dunkirk Grill Gazebo. Our clear, easy to follow,
step-by-step instructions will guide you through the assembly process from start to finish.
WARNING:
Read and follow all Warnings & Assembly Instructions before attempting to assemble.
Keep all children and pets away from assembly area. Children and pets should be supervised
when they are in the area of construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,
overhanging branches, laundry line, or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to the
product.
Assemble on level ground.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
This unit is heavy. Do not assemble this item alone.
Dunkirk Grill Gazebo
Item#: L-GZ326PST-2
Advertisement
Table of Contents
Summary of Contents for Dunkirk L-GZ326PST-2
- Page 1 Dunkirk Grill Gazebo Item#: L-GZ326PST-2 Congratulations on your purchase of our SUNJOY Dunkirk Grill Gazebo. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish. WARNING: Read and follow all Warnings & Assembly Instructions before attempting to assemble.
- Page 2 Parts List Top Screen Tilt Beam (1) Tilt Beam (2) Baffler Upper Connection Pole Lower Connection Pole Top Connection Pole Top Hook Cover Supporting Bar Big cover (1) Big cover (2) Big cover (3) Small cover (1) Small cover (2) Small cover (3) Cover panel Post (1)
- Page 3 Slate table top Corner slice Shelf 1 Shelf 2 Screen foot Hanger bar Grid Big basket Small basket Tissue basket Stick Small hook Cover Panel Presser Item Identification For ease of identification, all parts are labeled to correspond to the step number in which the part is used.
- Page 4 Fig.1: Insert Tilt beam B1 to Top screen A and tighten them with Baffler B3 by using Screw AA and Washer BB. Same way for Tilt beam B2. Then tighten Upper Connection Pole C1 to it by Screw AA and Washer BB (Side with mark “UP”...
- Page 5 Hardware Pack 2 M6 Washer 36 PCS TBZ10406SS M6X30 Screw 4 PCS TBZ00306030SS M6X15 Screw 30 PCS TBZ00306015SS M6X40 Screw 2 PCS TBZ00306040SS Fig.6: Insert the lower end of Big cover F2 to Cover supporting bar E, and tighten the upper end of F2 to Upper Connection Pole C1 with Screw DD and Washer BB.
- Page 6 Fig.8: Insert Small cover G2 to Cover supporting bar E, and then insert Small cover G1, G3 to E. Tighten the side with Screw DD and Washer BB. Fig.9: Tighten Cover panel H to Top Connection Pole D1 with Screw EE and Washer BB. Fig.10 Fix Cover Panel Presser V to Cover F1 F2, F3, G1, G2 and G3.
- Page 7 Fig.11: Tighten Screen foot M to Screen J with Screw AA and Washer BB. Fig.12: Tighten one Screen J to Post I1, I2 with Screw JJ and Washer BB. Another Screen J to Post I3,...
- Page 8 Fig.13: Put the top frame on the posts, and tighten it from bottom to top with Screw JJ and Washer BB. Connect posts with Tilt Beam B1, B2 by using Screw AA and Washer BB. Fig.14: Connect Slate table top K with Post I1, I2 by Corner slice L with Screw DD and Washer BB. Same way for another slate table top to I3, I4.
Need help?
Do you have a question about the L-GZ326PST-2 and is the answer not in the manual?
Questions and answers