Table of Contents
Advertisement
Phase 1 and Phase 2 must be configured accordingly to the IPSec server configuration, thus algorithms,
authentication and lifetimes of each phase must be identical.
Remote Network Secure Group – Set the remote network (Secure Policy Database) information. It must be LAN
network of remote IPSec host.
Field name
1. Tunnel keep alive
2. Enable
3. Host
4. Ping period (sec)
Explanation
Allows sending ICMP echo request (Ping utility) to the remote tunnel network. This
function may be used to automatically start the IPSec tunnel.
This function should be used every time.
Allows sending ICMP echo requests to the remote tunnel network
Enter IP address to which ICMP echo requests will be sent.
Set sent ICMP request period in seconds.
88
Advertisement
Table of Contents
